Hyundai GPS Navigation Update Tracker Installation -

What are the Vehicle Hyundai GPS Navigation Update Tracker Installation Process :-

When it comes to Hyundai GPS Navigation Update installation for your fleet, you’ll frequently have the option of choosing between plug-in vehicle trackers and hardwired GPS trackers.
Because they plug directly into an OBD-II port, plug-in vehicle trackers do not require any wiring.
Hardwired GPS trackers, on the other hand, require a cable connection to the vehicle.
Whatever option you choose for your fleet, you’ll most likely want to know how to properly install it.

Hyundai GPS Navigation Update Tracker Installation :-

Install the GPS tracker: Once you and your mechanic have identified a location that is easily obtainable but still out of sight of the driver and any potential thieves, your device will be installed in the vehicle.
Mounting is quick and easy, and the device is typically secured with zip tie straps or 3M VHB tape.
Connect the device to a power source: After mounting the device, you must connect it to a power source.
The device has three different-colored wires that must be connected in the correct order.
To begin, connect a grounding point to the black wire.
The red wire will then be connected to your vehicle’s 12-volt power supply.
Finally, connect the white wire to the 12-volt decided-to-switch ignition source in your car.
Ascertain proper installation: Your hardwired GPS tracker should begin working once the wiring is connected to a power source.
Park the vehicle out beyond where it will have a good signal, start it, and then wait five minutes before turning off the engine and restarting it to begin your test.
To complete the verification, follow the instructions provided by Installer Check.

How to Plug-In Vehicle Units Of Hyundai GPS Navigation Update Cars:-

Install the tracking device: Because our plug-in vehicle trackers are directly connected to a car’s OBD-II connector, the first step is to locate the connector.
The Velcro tie strip will then be installed above the connector in a gap.
Finally, attach the tracking device to the adhesive strip and plug it into the connector.
By securing it, you protect your driver while driving by preventing the device from becoming dislodged.
Use Extension Cable: If you don’t want to insert your plug-in tracker immediately into the OBD-II connector.
This extension cable allows you to place the device in a more convenient location, such as under your car’s dashboard.
To use the extension cable, simply connect it to the tracker and the OBD-II connector.
Start tracking: Drive your vehicle into an open area with a clear view of the sky, with your device plugged in and fastened.
The tracker will begin tracking as soon as you start your car. Keep in mind that it will take five minutes for the device to begin registering data after installation.

What are the Few Tips for Easy Car Hyundai GPS Navigation Update Installation are :-

The Hyundai GPS Navigation tracker should not be immediately accessible.
This will prevent the tracker from being destroyed or removed by the driver or passengers.
The gadget must be put in the region of service access (e.g. under the dashboard)
The device must be securely fastened to a smooth surface. It should be secured with double-sided tape or zip ties. The item should be put upside down.
Keep your GPS tracker away from metal surfaces and cables. The gadget cannot also be attached to heat-producing or moving parts since it will be damaged.
Because the device includes an accelerometer, it is sensitive to movement. It is advised that the installation location be sturdy and free of vibrations.
Before securing make sure the GPS system is functioning properly.
Depending on the system, check the lights, tones, online display, or sample data.
It might be necessary to go 3-5 km in places with weak network coverage for this.

What to consider while mounting a Hyundai GPS Navigation Update tracker in a car?

Make sure the surface is clean, smooth, and concealed from other people.
The OBDII port is regarded as the greatest spot in the car to install a GPS tracker instrument since its location assures that you do not have to worry about its battery life.
To disguise the GPS gadget, experts recommend putting the tracking device within the dash. It’s almost like the way a stereo is hidden.
Installing a Hyundai GPS Navigation tracker under the car requires the use of a magnetic tracking device that easily adheres to any metallic surface.

What to do if the Hyundai Car tracker gets disconnected after installation?

Even when unplugged, the gadget can continue to send messages thanks to an integrated antenna and battery backup system.
When the unit is unplugged, an alarm is sent to the management app, enabling the fleet manager to take steps to track the vehicle.
You can Visit to official website of Hyundai GPS Navigation Update and contact with us for more information.
When you visit to the official website of Hyundai GPS Navigation Update then there you will get the toll free contact numbers from that you can call us.
After call they will tell you how much time it will take to resolve or they will sort out problem within few hours.